Semaglutide tools

Semaglutide Dosage Calculator

Convert your weekly semaglutide dose into the exact number of units to draw. Enter your vial size and how much bacteriostatic water you used, and see the concentration, draw volume and unit mark instantly. Prefilled for a common 5mg vial.

Last updated November 7, 2026

31 Gauge needle recommended 100 unit syringe standard Prefilled for a 5mg semaglutide vial
A capped insulin syringe, a small unlabeled glass vial and sealed alcohol prep pads on a white tray
SEMAGLUTIDE DOSING CALCULATOR

Calculate your exact semaglutide dose

Enter your semaglutide vial size, how much bacteriostatic water you used, and your weekly dose. The calculator shows exactly how many units to draw on a 100-unit insulin syringe. It is prefilled for a 5mg vial mixed with 2ml of water at the 0.25mg starting dose.

1ml / 100 unit syringe
--
Concentration (mcg/ml)
--
Draw volume (ml)
--
Fill syringe to (units)
Enter your vial size, water amount, and target dose above to see your results.
Check your inputs. The calculated unit value is outside the 1-100 range for a standard syringe. Adjust your water volume or vial size.
Tip: More water added to the vial means lower concentration and more units to draw. Less water means higher concentration and fewer units.

Recommended needle setup

Gauge 31G
Length 5/16 inch
Syringe 1cc / 100 unit
Injection type Subcutaneous
Semaglutide dosing

Standard semaglutide titration

Semaglutide is taken once weekly and titrated up slowly to limit nausea. The schedule below mirrors the approved-product labels for Ozempic and Wegovy. Compounded and research semaglutide has no separate approved dose, so people generally follow the same steps. Set your actual plan with a prescriber.

PhaseWeekly doseWeeks at this doseUnits (5mg vial + 2ml)
Start0.25 mgWeeks 1-410 units
Step 20.5 mgWeeks 5-820 units
Step 31 mgWeeks 9-1240 units
Step 41.7 mgWeeks 13-1668 units
Maintenance2.4 mgWeek 17 and on96 units

The 0.25mg and 0.5mg steps are deliberately low; they let your gut adjust before the dose does much. A 5mg vial with 2ml of bacteriostatic water gives 2,500 mcg/ml, so every 0.1ml is 10 units and the 0.25mg start is 10 units. For background, see semaglutide and semaglutide vs tirzepatide.

Disclaimer: Educational tool, not medical advice. Semaglutide is a prescription medicine; compounded and research versions are not FDA-approved. Doses should come from a prescriber. Injecting anything carries real risks, including infection.

The math

How the peptide dosage calculation works

The calculator does three steps. You can check any result by hand:

STEP 1

Concentration

vial mg ÷ water mL × 1,000 = mcg per mL
STEP 2

Volume

dose in mcg ÷ mcg per mL = mL to draw
STEP 3

Units

mL × 100 = units on a 1 mL (100-unit) insulin syringe

Worked example: a 5mg vial mixed with 2mL of bacteriostatic water is 2,500mcg per mL. A 250mcg dose is 250 ÷ 2,500 = 0.1mL, which is 10 units.

5mg vial + waterConcentration250mcg dose500mcg dose
1mL5,000mcg/mL5 units10 units
2mL2,500mcg/mL10 units20 units
2.5mL2,000mcg/mL12.5 units25 units
5mL1,000mcg/mL25 units50 units

This calculator does the math only. It does not tell you what dose is appropriate. For how semaglutide is dosed, see the semaglutide guide and the peptide dosing guide. Before you buy or inject, read how to read a COA and peptide side effects.

Disclaimer: Educational tool, not medical advice. Most peptides are research chemicals with no FDA-approved human dose. Injecting anything carries real risks, including infection. Talk to a licensed clinician before starting any compound.

Reconstitution

How to mix your semaglutide vial

Follow these steps every time you reconstitute. Proper mixing technique protects the peptide from degradation.

  1. 1

    Start with a freeze-dried vial

    Lyophilized peptides come as a white powder. Store unreconstituted vials in the freezer. Never shake the vial.

  2. 2

    Draw bacteriostatic water

    Use bacteriostatic water only, never regular saline or tap water. Draw slowly from the BAC water vial with a clean syringe.

  3. 3

    Inject water slowly down the side

    Aim the stream down the inside wall of the vial. Never inject directly onto the powder. Let it dissolve on its own, do not shake.

  4. 4

    Swirl gently until clear

    Gently rotate the vial between your fingers until fully dissolved. The solution should be clear and colorless. If cloudy, discard.

Gloved hands gently rolling a small clear glass vial between the fingertips to mix it
Injection guide

How to do a subcutaneous injection

Four steps to a clean, accurate and comfortable injection every time.

STEP 1

Wash hands and prep

Wash hands thoroughly with soap for 20 seconds. Clean the injection site and vial top with separate alcohol swabs. Let both dry completely before proceeding.

STEP 2

Draw your dose

Insert the 31G needle through the center of the vial stopper at a slight angle. Draw back slowly to your calculated unit number. Hold syringe needle-up and flick to move bubbles to the top. Push slightly to expel air.

STEP 3

Pinch and inject at 45 to 90 degrees

Pinch 1-2 inches of skin firmly. Insert the 5/16 inch needle in one smooth motion, at 90 degrees if you can pinch a good fold of fat or 45 degrees if you are lean. Release the pinch. Depress the plunger slowly over 5-10 seconds.

STEP 4

Withdraw and apply pressure

Withdraw the needle at the same angle it entered. Press a clean alcohol swab gently on the site for 10 seconds. Do not rub. Dispose of the needle in a sharps container immediately.

Injection sites

Best sites for subcutaneous injections

Rotating sites prevents lipodystrophy and improves absorption.

Abdomen

2 inches from your navel on either side. The most common and accessible site. Easy to pinch. Rotate left and right sides with each dose.

Outer Thigh

The middle outer portion of your upper thigh. Easy to reach without assistance. A good alternative when abdomen sites need rest.

Upper Arm / Tricep

The back of your upper arm. Requires more flexibility to reach solo. Effective as a third rotation point for multiple daily doses.

Site rotation rule: Never inject the same spot twice in a row. A good 4-point rotation: left abdomen, right abdomen, left thigh, right thigh. Log each injection site in your BioStackIQ progress check-in.

Best practices

Dos and don'ts for peptide injections

Small technique differences have a large impact on safety, absorption, and comfort.

What to do
  • Use a new needle for every injection
  • Store reconstituted peptides in the refrigerator
  • Use bacteriostatic water for multi-use vials
  • Let the alcohol dry before injecting
  • Inject slowly over 5-10 seconds
  • Rotate injection sites every dose
  • Keep a log of injection sites and doses
  • Use 31G or finer needles for SubQ
What not to do
  • Do not shake the vial when reconstituting
  • Do not inject into muscle with a SubQ needle
  • Do not reuse needles, ever
  • Do not inject into red, swollen, or bruised skin
  • Do not use regular saline for multi-use vials
  • Do not store reconstituted peptides at room temperature
  • Do not inject directly onto the powder when reconstituting
  • Do not draw air bubbles into your injection
A red sharps disposal container next to sealed alcohol prep pads on a clean bathroom counter
Storage

How to store your peptides

Proper storage is critical. Heat and light degrade peptides. Cold and dark preserves them.

  • Unreconstituted (powder)

    Store in the freezer at -4F to -20F. Keep away from light. Can last 12-24 months frozen. Do not freeze-thaw repeatedly.

  • After reconstitution

    Store in the refrigerator at 35-46F. Keep away from light. Use within 28 days. Never freeze a reconstituted vial.

  • During travel

    Keep in an insulated cooler with an ice pack. Never leave in a hot car. If left at room temperature, use within 24-48 hours or discard.

Small glass vials stored upright in a clear container on a refrigerator shelf
FAQ

Semaglutide dosing questions

The questions that come up most when starting a peptide protocol.

How many units is 0.25mg of semaglutide?

It depends on your vial. For a 5mg semaglutide vial mixed with 2ml of bacteriostatic water (2,500mcg per ml), 0.25mg is 0.1ml, which is 10 units on a 100-unit insulin syringe. On that same mix, 0.5mg is 20 units and 1mg is 40 units.

How much bacteriostatic water should I use for a 5mg semaglutide vial?

Most people use 2ml, which makes the 0.25mg starting dose land on a round 10 units. More water lowers the concentration and raises the unit count; less water does the opposite. The total amount in the vial does not change.

How often is semaglutide injected?

Once a week, on the same day each week, subcutaneously. The dose is stepped up about every 4 weeks to reduce nausea. The calculator above is for a single weekly injection.

What is the semaglutide titration schedule?

The approved labels start at 0.25mg weekly for 4 weeks, then 0.5mg, then 1mg, stepping up roughly every 4 weeks toward a 2mg (Ozempic) or 2.4mg (Wegovy) maintenance dose. Your prescriber sets the actual steps.

How long does reconstituted semaglutide last?

Store it in the refrigerator at 35-46F, away from light, and use it within about 28 days. Keep unmixed powder frozen. Discard any solution that is cloudy or has particles in it.

Can I use an insulin syringe for semaglutide?

Yes. A 1ml, 100-unit insulin syringe with a 31 gauge, 5/16 inch needle is the standard choice for reconstituted semaglutide. Draw to the unit number the calculator gives you.

What vial size should I calculate for?

Enter whatever your vial actually contains. 5mg and 10mg vials are the most common. A 10mg vial with the same 2ml of water is twice as concentrated, so each dose is half the units of a 5mg vial.

Video guides

Learn the technique visually

Step-by-step video walkthroughs covering every part of the injection and reconstitution process. Videos load from YouTube only when you click play.

Peptide Reconstitution Explained: Mixing, Dosing & Injecting Safely

Complete walkthrough covering reconstitution, dosing, and safe injection technique.

Video page

Reconstituting your peptide vial

How to mix your vial correctly every time without degrading the peptide.

Video page

How to Rotate Injection Sites

Proper site rotation strategy to avoid lipodystrophy long term.

Video page

Ready to build your protocol?

BioStackIQ builds your personalized peptide protocol, checks every compound interaction, and guides you through every step.